Single/Multi Chamber Vapour Degreasers
Our Products
Our Categories
PRODUCT DETAILS :
HIGHCLEAN ULTRASONICS Vapour Degreasing System enhances cleaning speed and effectiveness where high degree of cleaning is required. These systems save energy, labour, floor space, consumables and hence most cost effective.
How does it work? The components are first cleaned in precleaning chamber for removal of gross contaminates, followed by vigorous ultrasonic agitation. Then the components are held in vapour chamber for vapour condensation to remove the residual contamination.
As the components reach the vapour temperature the condensation stops and components come out clean and dry. For efficient solvent recovery, water is circulated in the condensing coils. The system comprises of two, three or four chambers depending upon the level of contamination and degree of cleaning required. Units are also available with direct refrigeration cooling systems, distillation plants, filtration plants and fume extraction systems.
MULTI STAGE ULTRASONIC VAPOUR DEGREASING SYSTEM
HIGHCLEAN ULTRASONICS Vapour Degreasing Systems come with elegantly painted, compact, portable cabinets and are ideal for following applications
General Industries
Tools, dies, moulds, castings, gear, mechanism, pumps, bearings, spray guns, vacuum valves, fire extinguishers, cutlery, scissors, silverware, brassware. LPG valves & components etc.
Electronics
Semiconductor components, PCB’s, Electronic assemblies, Capacitors, Rotary Switches, Resistors, Electronic Microscope Components, Cathod Ray Tube Components, Solar Cells.
Electricals
Motors, Generators, Supply Meters, Voltmeters, Ammeters, Switches, Thermostats, Switch Gears, Vacuum Interrupters, Circuit Breakers, etc.
Aircraft
Bearings, Pumps, Filters, Hydraulic Components, Altimeters, Anemometers, Gyroscopes.
Automotive
Fuel Injectors, Spark Plugs (Carburetors), Pistons, Valves, Bearings, Filters, Engine Blocks, Shock Absorbers.
DEGREASING SYSTEM:
Technical specifications for 2 chamber vapour degreasing system.
| – | – | HU/2/250 | HU/2/500 | HU/2/1000 | HU/2/1000 |
|---|---|---|---|---|---|
| Chamber Dimensions Effective (inch) | U/S Chamber( L X B X H ) | 10’’ x 8’’x 6’’ | 15’’ x 12’’ x 10’’ | 15’’ x 12’’ x 18’’ | 24’’ x 12’’ x 18’’ |
| Total Solvent Cap. (Lit) | Vapour Chamber | 10’’ x 8’’ x 16’’ | 15’’x 12’’ x 20’’ | 15’’ x 12’’ x 28’’ | 24’’ x 12’’ x 28’ |
| U/s Power Output | 230 V, 1 Ph / 50 Hz OR 415 V, 3 Ph 50 Hz with four wires | 7.5 250w | 28 500w | 51 750w | 81 1000w |
Technical specifications for 3 chamber vapour degreasing system
| – | – | HU/3/250 | HU/3/500 | HU/3/1000 | HU/3/1000 |
|---|---|---|---|---|---|
| Chamber Dimensions Effective (mm) | pre.Cleaning Ch. | 10’’ x 8’’x 5’’ | 15’’ x 12’’ x 9’’ | 15’’ x 12’’ x 17’’ | 24’’ x 12’’ x 17’’ |
| U/S Chamber | 10’’ x 8’’x 6’’ | 15’’ x 12’’ x 10’’ | 15’’ x 12’’ x 18’’ | 24’’ x 12’’ x 28’’ | |
| Vapour Chamber | 10’’ x 8’’x 16’’ | 15’’ x 12’’ x 20’’ | 15’’ x 12’’ x 28’’ | 24’’ x 12’’ x 28’’ | |
| Total Solvent Cap. (Lit) U/s Power Output | 440 V, 3 Ph / 50 Hz with four wires | 7.5 250w | 28 500w | 51 750w | 81 1000w |